Welcome!
On this forum you can discuss iRidium with other users.
iRidium consist of 2 main components - i3 pro app and iRidium Server. Please post here your questions, ideas or errors you find.
Please send your questions to support team as a private messages.
Please subscribe to the Change Log to know our news
We have moved our support service to a new technical support system. Since 17.01.2022, we have disabled the ability to create appeals through the userecho personal account. Now all requests are processed via mail to support@iridi.com .
Thank you for your understanding and have a nice day.
I2 Control for IOS11
please, update I2 control for IOS11, I lose the original project and I only have ir in my iphone. I can’t manage my home
[KNX] 2 bits feedback not work
On my project have 10 presence sensors KNX. I need to force it with 2bits switch control and show the actual status.
I insert a command and a feedback on knx ip router driver (i not try with baos). Command work fine, but feedback not change when i send the command from iRidium or another device on KNX (for example an pushbutton).
Studio version 1.1.8.19555
Server version 1.1.9.12956
[Server][KNX] How to set server physical address with KNX IP Router/Interface?
If I have a project with KNX IP Interface or KNX IP Router, iRidium send command on KNX with address 15.15.250.
This is not correct if the interface/router stay on other line (for example 1.1.xxx).
How can I change the physical address used from iRidium?
Compatibility for Weinzierl KNX IPBaos774 and IP Interface 730/731
iRidium Studio is compatible with IPBoas774, IP Interface 730 and 731?
Studio not find this devices during import.
Will USB KNX / Raspberry Pi Interface work with IR server?
Will USB KNX Interface work with IR server?
such as this one
https://www.weinzierl.de/index.php/en/all-knx/knx-devices-en/knx-usb-interface-311-en
or this one
http://www.eelectron.com/prodotto/raspberry-pi-knx-interface/?lang=en
(rPI will see this as /dev/ttyAMA0 not sure if I can use kBerry for this or not?)
how to run scenes in iridium
button with 3 different status
I get 3 fan statuses low (0/1), med (0/1) and high(0/1). I want to change and indication of a button in 3 different states.What button type must I use (trigger)?
thanks!
Доступ к BAOS через интернет
i3pro работает с BAOS по внешнему статическому ip стабильно в Москве и области и из многих других мест (объект в Москве). Но, клиент перемещается по тем местам где он не работает (Сочи, Испания, США...). Там связи с BAOS нет, причем отображение ip камер на этом объекте в i3 работает везде. Как можно объяснить это, а лучше решить проблему? (Мысли: TTL маленький, ping большой, блокировка портов операторами...)
P.S. В Испании через прокси работает. Проблема на разных объектах
Is your KNX driver manufacturer specific?
Will Shneider MTN6500-0113 KNX IP Router work with Iridium KNX drivers? I am new to KNX platform, need some insight.
How to control KNX through internet by using knx ip router
We are using KNX - IP ROuter and HDL KNX devices are connected in the control panel , It works locally while we try to connect through internet it does not work, Kindly make a solution for it, Advanced thanks
Customer support service by UserEcho
