Add the scan by subnet and id.

In BUS Pro software we have a "fast" scan. Shows not all devices in big installations.

And precise scanning by id.

Iridium have only fast scan with time limit.

And it find devices with id 6 then 2 then 9 or something.

Please add scan by device id please.

Hi,

would it be possible to add a function in the upcoming i3-Gate to automatically update the Logic-Module (HDL-buspro) in a regular interval (once a day) to keep the Logic-Module which broadcasts the time/date to panels and internal logic functions up2date on "DaylightSaving"-Changes.

I checked out the communication protocol via UDP to the logic-module if you need that info.

So when using the i3-Gate with HDL-buspro this would be an awesome add-on. Its really annoying to allways login to the HDL logicmodule and do a time-change so that the client sees the correct time on the DLP panels.

With best regards,

Martin Lang - MEB Austria

hi,

please include the latest HDL wireless components correctly

into iRidium 3.x

for example there are new "1channel relais", "2channel relais", "1channel curtain control" out

with changed id-codes depending on a new firmware in these modules. iRidium doesn't recognize

them correctly.

also, all these new HDL wireless devices have 4-dry-contact inputs.these should be also included

directly into each device. otherwise we allways have to write additional devices and give them the same subnetid/deviceid, thats bad.

also the outdoor microwave/lux/humidity/temperature sensor is not recognized corrects, along with the wireless dlp panels! they have inbuild dimmer support.

and last big question, is it possible to clone/copy a self created hdl-device after setting it up with all the commands and feedback-channels needed? i can't see this option in the list?

thx!

martin lang

I would like to use iRidium and HDL-Bus to control my lighting system by Lumencache. Lumencache control commands are vis RS232/485 (e.g., light fixture #1 ON command is [1,255] and OFF command is [1,0]). Has anyone used HDL-Bus Logic and universal switch for RS232 control? I'm having difficulty figuring out the programming with the online documentation.

Hi all,

I want to change programaticaly (by JS)  the UVNumber of a command  of a HDL device  to send a UV Switch command ,  but I do not found docs  about how to do this.

Explain - I have a  HDL device named   HVAC1,   with a command named   IRChannel  and   the  UVNumber = 0

I want  to change by JS   the UVNumber   to  any number from 1 to 240  and   send  the UV Switch comand to fisical device to send a IR command  .

Something like this 

IR.GetDevice("HVAC1").SetParameter(UVNumber = 51) ;      //set UV Switch number in device 

IR.GetDevice("HDL-BUS").Set("HVAC1:IRChannel 51",255);   // Send UV Switch "n" On  to fisical device

Someone could help me ?

Thanks  in advance

Hi, it looks like iRidium scanner does not recognize correctly HDL buspro wired devices when they are connected behind the wireless gateway MBUS/GWRF.40

Whole network is wireless and one floor heating module is connected to the wireless network through the MBUS/GWRF.40 gateway. When scanned, it shows just as an HDL buspro device without any property except the ID. Is that something that can be resolved in any future versions?

Hello, I am using the yahoo weather program, when I use it, that program only works without problems, but when I enter it into another program, it does not work, does anyone help me?

Есть ли интеграция в ПО на уровне команд (не скриптов) MHRCU.433 версии Buspro? Интересует реализация проекта в 1 однокомнатной квартире с использованием i3 Pro или i3 Lite? 

some time the trigger butom  work and some the time not in the same configuration i follow the instanractions and videos, can you connect remotely with me to help me in this issue      

Hi there, I am trying to use HDL-ZAudio example but I found some problem.

If I use only the example file and emulate is OK.

If I merge my project with sample ZAudio project is OK.

But If I merge ZAudio project with my project, did not work, The Button to open Z-Audio has no command and I do not identify what command I need to use to run ZAudio, appear that has something running when open the project and I do not know why when merge it in my project it miss.

thanks