Напишите здесь описание Вашего форума ...
0
Voltooid

Inexpensive mains power control

Iain Brew 1 jaar geleden in Tips and Tricks bijgewerkt door Aleksandr Romanov (CTO) 1 jaar geleden 1

Hello

Just a note that I have been trying to track down an easy way to control a mains power point in my iRidium project. There are professional PDU units available with TCP, UDP and HTTP control but they can be quite expensive. Recently, I picked up a TP-Link HS100 smart switch ($50 at JB HiFi in Australia) These are available worldwide. This is originally designed to only work with the manufacturers software, but I found a way to control this with a custom driver in iRidium:

Create a Custom TCP driver with:

IP: address of smart switch on your wifi network

Port: 9999

No login/password required. 

For commands, use the following:

ON

00 00 00 2a d0 f2 81 f8 8b ff 9a f7 d5 ef 94 b6 c5 a0 d4 8b f9 9c f0 91 e8 b7 c4 b0 d1 a5 c0 e2 d8 a3 81 f2 86 e7 93 f6 d4 ee df a2 df a2

OFF

00 00 00 2a d0 f2 81 f8 8b ff 9a f7 d5 ef 94 b6 c5 a0 d4 8b f9 9c f0 91 e8 b7 c4 b0 d1 a5 c0 e2 d8 a3 81 f2 86 e7 93 f6 d4 ee de a3 de a3

I am working on also retrieving the status of the switch so that you can receive feedback. 

This could be a cheap, simple and handy way to integrate mains control into your project i.e. fan, coffee machine, pool pump, Christmas lights etc.

0
Beantwoord

Play sound on Irdium server

Arjan Gorinsek 1 jaar geleden in Tips and Tricks bijgewerkt 1 jaar geleden 5

I have connected a speaker to my Raspberry Pi how is running iridium server.

Now I want to send a command that the raspberry plays a sound.

How can I do this?

0
Beantwoord

Update iridium server Lite on raspberry PI

Roger Stenvoll 1 jaar geleden in Tips and Tricks bijgewerkt door Vladimir Ovchinnikov 1 jaar geleden 1

Hi!

I am currently running version 1.2.8.15060 of iridium server on my Raspberry PI.

What is the best procedure to upgrade my server to the latest version?


Best regards,

Roger

0
Under review

can you store a list on the iridium server that the clients can access?

Jack Mutsers 1 jaar geleden in Tips and Tricks bijgewerkt door Vladimir Ovchinnikov 1 jaar geleden 3

im making a messaging system and i was wondering if i could store the messages on the server because whenever i reopen the client the messages are gone.

0
Beantwoord

Good (working) example for controlling RGBW (including visualize feedback)

Theo Derks - NL (distributor) 2 jaar geleden in Tips and Tricks bijgewerkt door Iain Brew 1 jaar geleden 2

Hi,


RGBW is more and more popular. We need a good example how to control RGB+W to (for example) KNX. Including the possibility to visualize the selected (active) color (RGB + W) into (for example) a button or picture.


Can you create such an example, or update one of the existing examples? Including some documentation in the used Javascript, so installers undestand what is done in JS?


Thanks!

0
Beantwoord

Clipsal C-Gate JS Driver compatibilty

Steve.c 2 jaar geleden in Tips and Tricks bijgewerkt door Aleksandr Romanov (CTO) 2 jaar geleden 1

Does the Clipsal C-Gate JS Driver work with i3 pro or only iRidium V2 and i2 control 

0
Declined

Debug Mode with Telnet

Mike Slattery 2 jaar geleden in Tips and Tricks bijgewerkt door Aleksandr Romanov (CTO) 2 jaar geleden 1

It would be a lot easier to allow for debug information to be sent to a telnet server. This way we can just run PuTTy on our PC and view the log information from the panel. Sometimes I am working on systems that do not have internet. Maybe just add a Telnet enable on the Remote Debug window and we can set the IP and port to our PC. 

0
Beantwoord

Studio does not work with USB3 dock (DisplayLink)

'Wouter van der Post' 2 jaar geleden in Tips and Tricks bijgewerkt door Aleksandr Romanov (CTO) 2 jaar geleden 6

We've got new USB3 docking stations at work with two monitors connected, but iRidium Studio does not function properly when using the dock.

As you can see in the attached screenshot below the viewport stays black, no matter which page/popup you select. Also this project is set to 1920x1080, the black rectangle is smaller.



It does not matter if the DisplayLink driver is installed or not.

OS: Windows 10

iRidium: v1.2.6

0
Beantwoord

2N Intercom Get sip call when minimized

Maurits Roos 2 jaar geleden in Tips and Tricks bijgewerkt door Aleksandr Romanov (CTO) 2 jaar geleden 1

Hi

I is there any way to get a sip call from a 2N intercom when the app is minimised


Thanks

Maurits

0
Voltooid

Windows i3 Pro App

Mike Slattery 2 jaar geleden in Tips and Tricks bijgewerkt door Aleksandr Romanov (CTO) 2 jaar geleden 1

It would be great if the there could be two builds of the i3 Pro app for Widows:

One that is for the user that only has the Client, Transfer and Shortcuts. This should be a much smaller file and take a lot less time to download.

The other is only available to Integrators that has everything.