имеется массив var Logic_4 = [0,0,0,0,0,0,0,0,0,0];

сохраняю его в виртуальный канал IR.SetVariable("Server.Channels.Logic_4", Logic_4);

как потом вытащить массив из виртуального канала?

I want to change a iridium server to a different PC, and if possible i'd like to back up some Tags that have json objects with stored data, so i could transfer it to the new computer.

Is there a way to back up and restore server tags?

Is it possible to check if Iridium Server is open on windows? If for some reason it is closed, windows opens it again automatically.

Is it  possible to have a second windows pc with a server backup. For some reason, if first server fails another server start to run? 

Hi,

We have customer wanted to downgrade their i3 to i2 control. Previously they have been using i2 control then we have upgraded i3 due to IPAD. Recently their IPAD been stolen and they want to use an old Andriod panel which does not support i3. Please advide

Hi,

I've got a server project that is using the KNX IP Router driver for lights, climate, blinds and invixium controls. We were seeing a problem where the driver seemed to be continually flooding the KNX bus with status requests, leading to severely delayed control.

I noticed the 'Delay between polls' property set to 100 - Changing this to 0 seemed to do the trick and disabled polling (the desired behaviour). This is giving a much more reliable experience, but every 30-60 minutes I see the severely delayed control again - and when I look at the iRidium logs, the KNX driver appears to be flooding the KNX bus with status requests again.

Does setting 'Delay between polls' to 0 disable polling? If not, how can I disable all polls except that at the server launch?

Thanks,

Dan

Hi,

I know that I can get feedback value by using tag name

IR.GetVariable("Drivers.KNX_MAIN.Date")

But how to get feedback/command KNX address using JS?

Good Morning, 

i'm having this issue about Server and Telnet/TCP.

What i'm trying to do is to control a smart power socket with 4 ports (netio 4c) with buttons , all the input commands are ok but i need to receive a feedback (the light is on / the light is off). 

I'm controlling the socket via Telnet (using hex code).

The circled button should receive the feedback.

And this is the Server I/O config.

this is the command to get the port status (n.1 of 4) : 

0x6c,0x6f,0x67,0x69,0x6e,0x20,0x61,0x64,0x6d,0x69,0x6e,0x20,0x61,0x64,0x6d,0x69,0x6e,0x0d,0x0a,0x70,0x6f,0x72,0x74,0x20,0x31,0x0d,0x0a

Thank you, Samuele

What protocol and port is used during project update? I can get to the internet but cannot update project. The school is blocking the ports. I hope to be able to tell them which ports to open.

I want to integrate IP control of integra AVR DRX-R1 in iRidium i3 pro . i have found JS module for Integra DTR models with supported iridium version i2 Control V2.1. But it is not working with integra DRX-R1. Please guide how can i control integra AVR DRX-R1.

I found the article: https://support.iridiummobile.net/knowledge-bases/6/articles/169-set-up-the-mobotix-t24t25-sip-server?lang=en about T24 and T25 from Mobotix.

Does the T26 have the same possibiltiies?