Предлагаю реализовать возможность подключения и чтения любых баз данных(большинства). Большинство оборудования СКУД пишут свою базу в .mdb формате. Поддержка данного формата базы данных могла бы расширить области применения Iridium.

Hi

Installers need the option, that end-users can change the scheduled timers/clocks that are defined in iRidium Server.

Also values, used in routines, have to be changeble by end-users. For example set-points for temperatures etc: end-users must be able to change them by theirself.

PLease implement this.

Thanks

Theo

Hi,

would it be possible that i3 Server pro can act and react like a real HDL-Buss Device?

In a real installation, there is a mix of Control-Panels like an iPad/iPhone/Android-Tab and real HDL-Bus enabled panels like the DLP panel or switches. It wouldn't be possible to control actions on the i3 server from other panels than i3 panels.

For example, it should be possible to send dimmervalues directly to the i3 server. the i3 server should act like a 12channel dimmer for example. So it would be possible to trigger normal dimming actions from every HDL Bus Device like it would be a real dimmer. Or for example the i3 server should have UniversalSwitches like the HDL LogicModule, so that we can set and read this UniversalSwitches from any HDL-Bus device, etc.

So, please include a method to add "virtual" HDL-Bus-Devices per channel basis like a DimmerChannel or a UniversalSwitch. Also, additional "virtual" devices would be fine like a temperatur module or a curtain module that gets the values from within i3 Server variables...

Also, please include an option to update the current time and GMT+/-offset via the i3 Server to the LogicModule. So that the annoying daylightsaving time would be automatically corrected on the HDL-Bus.

Thx!

With best regards,

Martin Lang - MEB Austria

The main feature we needed out of iRidium Server was scheduling and we have not got it in a usable format. This is very disappointing.

Having to use complex JS programming (yes it is complex for most installers) will mean we do not get the take up of iRidium server that we were expecting

I already have a scheduling script (that is much easier to setup than the iRidium Server version in the scenes and macros example). We just run this in one project on a PC on the network that is only used for scheduling and iRidium Gate (ie what iRidium server was going to replace)

All the installer needs to do in my script (and I have done this for them):

delay: driver name: command: hex or text:

"0; Clipsal Gate; ON //JONES/254/56/1; false";

And with the use project tokens in the GUI Editor for if the schedule is enabled, the day of week(not shown), and time and we can much more easily do scheduling:

iRidium server is not solving the scheduling problem - it is making it worse as it is far too complicated.

What we need is a GUI interface to setup scheduling without the need for any JavaScript. 90% of installers are not programmers and this is one of the big preventers of installers using iRidium.

Please re-visit this with urgency as I cannot promote scheduling in the current format as the solution.

In this instance, iRidium server is just replacing a PC. Not a convincing selling point given the increase in complexity for installers :(

hi,

i'am a user from the beginning, and i like whats going on with iRidium Mobile.

would it be possible to make a iRidiumServer version for the whole synology nas family too?

either as a normal programm package or as a docker? would be really really cool if it runs on the synology nas with two ethernet ports. so eth1 could be used as the normal "house"-lan port and eth2 could be connected to the ip/ethernet interface of the bus system. and in most cases, a nas is allready there and running 24/7, so why don't use it as the server? and its linux, and stable too...

thanks!

with best regards,

martin lang

Hi, just as suggestion it would be better if the Iridium Server will start as Windows SERVICE. This will allow the start of the iridium server also if you were not logged into the system.

Сейчас чтение канала KNX на UMC сервере не предусмотрено.

Как средствами скриптов обработать запрос на чтение из системы KNX?

Hi,

In every server an Astro-clock is available. To make events depending on 'Sun up' or 'Sun down' and/or astronomic time.

Please add this in iRidium server.

Thanks

Theo

Hello, please vote!

Hi,

i think it's a good idea to have the possibility to change the name of de iRidium Server (UMC/RPI) in the webinterface. Now, this is only possible in Linux, but installers wants the possibility to change this also by themself in webinterface.

Thanks

Theo