Installers that are working in security-industry are asking us: is it possible to implement the Onvif-protocol for easy setup of IP-camera’s etc?

Please see www.onvif.org (http://www.onvif.org)

Драйвер для Apple TV

Hi there,
There is a great opensource Home Automation System, called openHAB available. The problem of those systems is actually lack of nice looking GUIs for users.
iRidium could solve that problem if there would be a feature available, which could connect to OpenHAB server over ethernet.
Did anyone try this? What options are available?

На умный дом со всех сторон наступает IT и SNMP используется для мониторинга UPS в здании, точек доступа, электросчетчиков и множащихся систем типа NetPing http://habrahabr.ru/sandbox/56751/

Hi,

Use the attached project,
Set the IP Address to the GC driver to local ip of the global cache device you have.
run the project
Device is shown online
Unplug the network connector from the global cache device
the device still shows in the emulator the device is connected.
Next,  turn off\unplug the network cable on your system running the emulator so that there is no network access.
The emulator still shows that the global cache driver is connected.

Update:::  I have tested this with KNX IP Router,  this will timeout the connection when the timeout value is reached with both cases.  It should put the driver into a offline state the moment the internet connection is down.

Then I tested this with the AV TCP driver,  again the same as the GC Driver.

To conclude;  firstly there should be a configurable timeout setting for all drivers like the KNX IP Router driver.
Secondly,  the moment that the internet connection is lost,  ie no wifi,  wifi card turned off and with wired network connections, network card gets disabled or network cable unplugged  then ALL drivers configured in the project should be pushed into an offline state.

Thanks,



Roger

было бы интересно видеть поддержку оборудования фирмы RTI (http://www.rticorp.com/)
Вроде люди адекватные, думаю, что пойти на встречу могут. Iridium использовать в качестве интерфейса управления, вместо их программы для мобильных устройств.

How to read STRING from memory using EPSNET and visible in GUI?
in TECOMAT:
VAR_GLOBAL
text1 AT% R40000: STRING[10];
END_VAR;

Has anyone had experience integrating BACnet into iRidium? Are there any developers in the community that would be able to provide such a driver? This would provide a sound means of integration between building HVAC systems, lighting systems, security and AV.