i tried to setup the deadband for floatnumbers (temperaturs) to 0,2 or 0,5. but this isn't working.

the character point "." is not accepted in the input field. when using 0,2 for example, the server still stores integer jumps.

In Transfer it is possible to set 4 passwords that you can use for a button functionality to become 'password protected'.

However I would like to design my own password screen/popup and would like to be able to validate the entered password against one of those 4 passwords. Is there a way to "get" one of those passwords in JS? Or validate a string against them?

Something like:

if(IR.ValidatePassword([password string], 1, 2007) {
}

The "1" parameter indicates which of the 4 passwords should be used, could be an enum too.

The "2007" parameter is a default value to use in the emulator, since you cannot set one of the passwords there.

Please change to have alphabetical order

Quite often there are dynamic images that are used when changing from LAN to phone network and it can be difficult to find and un-select them

thanks

Hi,

is there an event that would be triggered right before a new project

will be uploaded to the server to have time to save some data in the database?

Ciao

Martin

hi,

please include the latest HDL wireless components correctly

into iRidium 3.x

for example there are new "1channel relais", "2channel relais", "1channel curtain control" out

with changed id-codes depending on a new firmware in these modules. iRidium doesn't recognize

them correctly.

also, all these new HDL wireless devices have 4-dry-contact inputs.these should be also included

directly into each device. otherwise we allways have to write additional devices and give them the same subnetid/deviceid, thats bad.

also the outdoor microwave/lux/humidity/temperature sensor is not recognized corrects, along with the wireless dlp panels! they have inbuild dimmer support.

and last big question, is it possible to clone/copy a self created hdl-device after setting it up with all the commands and feedback-channels needed? i can't see this option in the list?

thx!

martin lang

Почему окно Свойства не может быть изменено по размерам?

Во время загрузки проекта иридум, в котором есть ссылка на серверный проект, редактор спрашивает "Загрузить серверный проект?". Проблема в том что это диалоговое окно не отображается в панели задач и после запуска файла проекта (загрузка которого занимает некоторое время) оно оказывается за другими окнами.

Если бы в панели задач отображался иридиум во время загрузки - было б гораздо удобнее.

У меня есть такое окно, в котором вводится текст.

Текст длинный и не помещается в окно.

Хотелось бы иметь полноценный editbox со скроллбарами и т.д.

Хотелось бы иметь возможность получать статусы ошибок подключения к серверу и драйверам.

Hi,

I am interested in adding 2N Helios ip door intercom to my project. I have no idea where to start, anybody can help me with that. I have tried using SIP intercom but that is not working for me. Any suggestions please,

Thanks