Поделитесь своими идеями, пожеланиями и примерами в этом разделе. Идеи, за которые голосуют чаще всего, будут реализованы быстрее!
Мы перевели нашу службу поддержки на новую систему технической поддержки. С 17.01.2022 мы отключили возможность создавать обращения через личный кабинет userecho. Теперь все запросы обрабатываются по почте на support@iridi.com .
Спасибо вам за ваше понимание и хорошего дня.
Похожие темы не найдены.
0
Завершен
Разделение старшего и младшего байта в 16-битном слове
Ekaterina (head of support) 10 лет назад
в Продукты / Modbus
•
обновлен Sergey (expert) 10 лет назад •
8
Мы получаем десятичное число, которое нужно перевести в НЕХ (2 байта), отделить младший байт от старшего и по отдельности перевести их обратно в DEC (получить два десятичных числа)
IR.AddListener(IR.EVENT_TAG_CHANGE,IR.GetDevice("Modbus TCP"),function(item,value) // активируем слушатель изменения любого тега драйвера ModBus TCP
{
if(item == "Feedback 1") // указываем имя регистра, к которому нужно применить битовую маску
{
// Изначально было 10-ое 2-ух байтовое в виде строки
var dec2byte = "27542";
// Конвертируем в число, а затем в 16-ую строку
var hex2byte = parseInt(dec2byte).toString(16);
// Получаем первый байт из строки
var hexfirst = hex2byte.charAt(0) + hex2byte.charAt(1);
// Получаем второй байт из строки
var hexsecond = hex2byte.charAt(2) + hex2byte.charAt(3);
// Получаем десятичное число из 16-ых байтов в строке
decfirst = parseInt(hexfirst, 16);
decsecond = parseInt(hexsecond, 16);
IR.Log(decfirst)
IR.Log(decsecond)
});
0
Отвечен
Cbus shutter control
Hi,
Is anyone able to give some pointers as to how I work with a CBus shutter control. Not sure of the button type/config I need.
Keeping the default settings from the CBus Cgate driver (as lighting app and immediate ramp) with a trigger button lets move the blinds in one direction only.
Have tried cloning the command and changing to on/off but wasn't able to get it working.
Thanks,
Damian
Is anyone able to give some pointers as to how I work with a CBus shutter control. Not sure of the button type/config I need.
Keeping the default settings from the CBus Cgate driver (as lighting app and immediate ramp) with a trigger button lets move the blinds in one direction only.
Have tried cloning the command and changing to on/off but wasn't able to get it working.
Thanks,
Damian
Ответ
Olga (expert)
10 лет назад
Dear Damian,
Please see the example of using the button here: CBusTestBed_iPhone (button).irpz
Commands are assigned to the button using Send Number. Then write a number depending on the button function (Up = 255).
If you want to control from 1 button, then you have to use scripts. Please describe in details what you want to get from the button (for example, what will happen to the button if you click on the it in iRidium - your curtains go up and then you strop them using the wall panel, not the interface. In what sequence should the commands be sent when clicking Up/Down/Stop? etc.)
Sincerely yours,
Olga Ermakova
iRidium mobile Team
Please see the example of using the button here: CBusTestBed_iPhone (button).irpz
Commands are assigned to the button using Send Number. Then write a number depending on the button function (Up = 255).
If you want to control from 1 button, then you have to use scripts. Please describe in details what you want to get from the button (for example, what will happen to the button if you click on the it in iRidium - your curtains go up and then you strop them using the wall panel, not the interface. In what sequence should the commands be sent when clicking Up/Down/Stop? etc.)
Sincerely yours,
Olga Ermakova
iRidium mobile Team
0
Завершен
HDL Watchdog
This simple script make you able to see if the communication with HDL bus stopped.
In case of UDP broadcast connections it is not possible to see the online status of HDL IP module, so you have to look at the traffic from HDL, and if it is stopped for awhile you can show "Offline message".
See the example attached.
You can choose a time without traffic indicates the offline. It is 10 sec by default.
!HDL Online indicator.irpz
In case of UDP broadcast connections it is not possible to see the online status of HDL IP module, so you have to look at the traffic from HDL, and if it is stopped for awhile you can show "Offline message".
See the example attached.
You can choose a time without traffic indicates the offline. It is 10 sec by default.
!HDL Online indicator.irpz
0
Отвечен
Импорт драйвера KNX или переменных в существующий драйвер KNX
Владимир Нестеров 10 лет назад
в Продукты / KNX
•
обновлен Ekaterina (head of support) 10 лет назад •
1
Добрый день.
Хотелось бы понять существует ли форма, аналогичная форме файла xls для ModbusTCP, чтобы импортировать переменные KNX (commands, feedback).
Переменных большое число, делать проект в ETS не удобно, т.к. очень большое число переменных и проекта не будет.
Хотелось бы сделать файл и импортировать его в либо как дополнительный драевер, либо как добавление переменных в существующий драйвер.
Хотелось бы понять существует ли форма, аналогичная форме файла xls для ModbusTCP, чтобы импортировать переменные KNX (commands, feedback).
Переменных большое число, делать проект в ETS не удобно, т.к. очень большое число переменных и проекта не будет.
Хотелось бы сделать файл и импортировать его в либо как дополнительный драевер, либо как добавление переменных в существующий драйвер.
0
Отвечен
How to setup the group climate for each rooms?
Punith 10 лет назад
в Продукты / HDL-BUS Pro
•
обновлен Ekaterina (head of support) 10 лет назад •
5
How to setup the group climate for each rooms?
Kindly see the attachments which is marked in the yellow and please tel me the ways
Kindly see the attachments which is marked in the yellow and please tel me the ways
0
Отвечен
32-bit decoding for incoming UDP packets
Emery Anderson 10 лет назад
в Продукты / AV & Custom Systems
•
обновлен Sergey (expert) 10 лет назад •
6
Ashly NE Ethernet protocol I'd like to setup audio level meters for an 8-channel DSP device but the incoming data is formatted as 32-bit (via four 1-byte packets). How would I decode this data to a multilevel graphic? I've attached the ethernet protocol for the device. Also, what is the max range for the multilevel items?
0
Отвечен
Long project saving time
Philippe_Fontaine 10 лет назад
в Продукты / AV & Custom Systems
•
обновлен Ekaterina (head of support) 10 лет назад •
2
Hello,
I have some problems when i save the project in the editor.
I started from the project from the Black Gui Template.
The save time for this was 7 seconds (project size 8915 kb)
I have delete 1 popup page and then the save time was 1 min 20 sec. (project size 13641 kb)
I have add 20 images to the gallery and then add it to a popup page and then the saving time is 4 min 40 sec (project size 112132 kb)
When i delete an other unused popup page the i receive an error message that i have not enough memory to save it.
Very strange because when i delete some files the project size is bigger.
I work with windows 8 - Intel core I5 with 8 GB Ram memory
The editor is version V2.2.0.17180
Please can you tell me what is wrong?
I have spend a long time at this project and i can work further on it…
Many thanks to reply
I have some problems when i save the project in the editor.
I started from the project from the Black Gui Template.
The save time for this was 7 seconds (project size 8915 kb)
I have delete 1 popup page and then the save time was 1 min 20 sec. (project size 13641 kb)
I have add 20 images to the gallery and then add it to a popup page and then the saving time is 4 min 40 sec (project size 112132 kb)
When i delete an other unused popup page the i receive an error message that i have not enough memory to save it.
Very strange because when i delete some files the project size is bigger.
I work with windows 8 - Intel core I5 with 8 GB Ram memory
The editor is version V2.2.0.17180
Please can you tell me what is wrong?
I have spend a long time at this project and i can work further on it…
Many thanks to reply
0
Отвечен
gestures with device commands
Barry Jones 10 лет назад
в Продукты / Other drivers
•
обновлен Ekaterina (head of support) 10 лет назад •
5
dose anyone have a gestures script or demo with device commands i.e. ir, serial, ip, would like to to control devices from a gesture rather than a button, i.e. up, down, left, right, enter,
have looked at the gestures scripts but don't know how to link the device command to it.
barry
have looked at the gestures scripts but don't know how to link the device command to it.
barry
0
Завершен
Improvements to Helvar driver
Andrew Glossop 9 лет назад
в Продукты / Other drivers
•
обновлен Ekaterina (head of support) 9 лет назад •
1
Can you please add these properties to the wiki. The image showing properties for recall group scene is out of date.
Сервис поддержки клиентов работает на платформе UserEcho
