I use HDL with alexa gate

For Light and AC i use "tune on" \ "turn off" 

For AC Fan Speed - what words should i say ?

For AC Mode change - what words should i say ?

For Global Cache Macros - Turn On \ Turn OFF work :), but  "active macro" doesn't work (For use with macros name "TV OFF, Room AV OFF"). if i want to use "tv off "macro i have to say "Turn ON TV OFF" whice is a problam.

Thanks

Adir Peleg

Добрый день!

Очистить историю одного или нескольких графиков

Необходимо очистить историю одного или нескольких графиков при этом сохранив данные остальных трендов. Это необходимо в случае, когда типы данных были настроены не верно, поэтому сервер хранит заоблачные (например, е*14) или просто неверные данные.

Можно это делать через веб-интерфейс, либо скриптом

Hi,

I was wondering if anybody has tried this? You would be able to access NVR > IP Camera Stream, PTZ control function etc...

Dear Team

First of all , thank you very much for help on different  module and technology .

Here ,I'm writing for Zwave Fibaro  JS Module which is available on website .

I'm a system integrator of KNX and z-wave ,where I want to use iridium for its advanced capabilities and GUI.

I tried with readymade driver , its work very fine .

1:- In this module  , the the device id is programed in setup JavaScript and according the property of the device , the popup came  but how can I program it for a real home eg. let say a home with 4 bedroom and one living .

In living  I have installed 4 switching  actuator (id-12,13,14,15) ,1 Dimming(id -16) , 2 Curtain(id -18,19) ,1 RGB(id -20,21,22) and so on with master room ,Kids room , parents room,and guset room (4  S/W, 2Dim ,2 Curatin , 1RGB In each room) .

Now I want to give the client a proper GUI like iOS Style (Black edition) or iOS Style for Smart Home  or Slide (available for download On website ) with real-time feedback .How can I do that with zwave fibaro module .

Please help me to do this task ,if any example with fibro system with this type of control, you can provide its very useful for  me .

I want to give client a proper solution with Iridium with unlimited possibilities which is not possible with fibaro  application

Hope I make my self clear with the desire , feel free to ask if any question .

Eagerly waiting for positive reply

Добрый день, возможно ли установить иридиум сервер на устройство стороннего производителя , а именно JetHome ?

Характеристики устройства: 

A113X (ARM Cortex-A53) с рабочей частотой до 1,5 ГГц.

Оперативная память 1 Гбайт DDR3.
Энергонезависимая память eMMC flash 16 Гбайт.

Операционная система Armbian с возможностью установки большого количества дополнительных пакетов из репозитория Ubuntu 20.04, а также других сторонних приложений. Возможно установить такие популярные системы для домашней автоматизации как Home Assistant, openHAB и др.

Hi,

Is it possable to add  comma to number in lable?

For example linking relation to item value

and set text to $F2  will show number like 1234456.99

and way to format it like 1,234,456.99  ?

Is it possible do have a second iridium server running for redundancy, So they can run master/slave and autmatically change server when one is down for maintenance or updating?

Hello,

I have a server project with 2 drivers:

The total tags count shows 17. I only have 3 commands and 3 feedbacks. Where does this 17 come from?

Hi,

I would like to know how to get the LAN IPv4 address of a computer running iRidium Server. I searched in the system tokens but none of them seems to have this information. I also tried something like IR.GetServer().Host. But IR.GetServer() object does not have this property.

Thank you.