Hi!

Is there any instruction on how to use the HDL UV/Logic module in i3Lite?

I would like to be able to set an UV in my project.

Best regards,

Roger

We've got new USB3 docking stations at work with two monitors connected, but iRidium Studio does not function properly when using the dock.

As you can see in the attached screenshot below the viewport stays black, no matter which page/popup you select. Also this project is set to 1920x1080, the black rectangle is smaller.

It does not matter if the DisplayLink driver is installed or not.

OS: Windows 10

iRidium: v1.2.6

Hi,

today i tested my Project on an other Smartphone.

Now i can't log in on my IPhone, Error -> Panel Limit for i3 pro is exceeded.

How can i log me on my IPhone in?

I deleted the app on the Test Phone already.

Possible to reset the Panel User anywhere?

Thanks.

Hi,

I have a customer that wants a multiuser PCs (5 PCs). He wants to use authentication throw login and password. Is it possible to user this authentication method?

Does iRidium provides access to user panel throw a browser (Chrome, Safari, IE, etc) or I have to create iridium Server and iridium UI for each PC? 

Hello, I have done all setup for UMC server to be KNX IP router but still it canot be searched by ETS5 in discovered interfaces as in your video, what should I do, thanks

I have a project for AV automation and I'm using a global cache driver to control the device trough rs-232 port.

My device has the command "<11VOxx0x0D" to control the volume, where the 'xx' is the level of volume that goes from 00 to 38.

I need to create a level that controls this volume without the need of the creation  of 38 buttons for it. Can anyone help me?

I have been using a SEETEC 10.1" USB DisplayLink monitor running on an INTEL NUC for some applications. When I tried to run i3Pro, it would only display a white screen for the program. The resolution of the monitor is 1024x600. I did find a work around by placing a monitor EDID emulator on the HDMI out of the NUC and then set the display settings to duplicated at 1024x600.

Can you check to see why i3Pro does not display with a DisplayLink monitor. 

i need help, i have iphone 6s, resolution in 1366 pixel, i make 1500 pixel list and scroll correctly, if i make 1500 pixel subpage, and i make static list don t scroll, or top or bottom, help please

I have a Windows 10 PC set up as an iRidium Server which has dual NICs:

NIC 1 (AV Network) 192.168.3.1, 255.255.0.0 (no internet access - manually set)

NIC 2 (Campus Network) 10.36.132.x, 255.255.255.0 (internet access via DHCP)

On the PC itself I can see the web server via 127.0.0.1:8888 and 10.36.132.x:8888

From another PC on the Campus network I can see it via 10.36.132.x:8888

However, iRidium does not see the 192.168.3.1 address I have setup for the AV network. Is there a way for it to be accessible from multiple IPs? I noticed when starting up, server lists all the IPv4 addresses available to the machine and it does show my 192.168.3.1 address. 

I want to be able to have my AV network operate independent on one Ethernet interface, and use the second Ethernet interface to log in to the server from the normal campus network. Can this be done?

On the login screen, I found  "SIGN IN WITH QR-CODE". How does this work. I've checked the forum, but all info seems to be V2. Whatever I try, I'll get QR Code not supported.