Поделитесь своими идеями, пожеланиями и примерами в этом разделе. Идеи, за которые голосуют чаще всего, будут реализованы быстрее!
Мы перевели нашу службу поддержки на новую систему технической поддержки. С 17.01.2022 мы отключили возможность создавать обращения через личный кабинет userecho. Теперь все запросы обрабатываются по почте на support@iridi.com .
Спасибо вам за ваше понимание и хорошего дня.
GC IP2IR sending from wrong port. LED flashes on wrong output
When I try to send commands from port 2, LED flashes on IR port 1 and not on output 2, as should (and is set up to do...) All other ports are working fine.
What could that be?
I have tried to do a restart, I have tried other IR emitters, other IR codes.... (+++)
Problem when send command to GC IP2SL connect with Coolmaster 1000D
Galaxy demension intrusion panel
Hello ,
Is there anyone who made a connection with a honewell galaxy demension intrusion panel in iridium?
Hoenwell told me that this can be done through RS485 or Ethernet.
Greetings
NIco
Cubesensors
I`ve seen this new amazing product, would be good if iRidium support it.
http://cubesensors.com
Thanks!
Logic machine/BAOS KNX
Hi
I am doing a new build job.
I have not used iRidium before.
I looked at the KNX tutorial.
This is what I would like to do:
Has anyone else done something like this?
How do I do the graphs etc?
Maybe Sonos is better than Nuvo - I could always use the Nuvo app..
Many thanks
James
control device in Myhome systems through interface
You can try to contact via official web-site: http://www.bticino.com/amministrazione/contacts/
Razberry Zwave - v2.1.1
Razberry Zwave - v2.1.1 does not work with Iridium - Razberry v1.7.2 and V2.0.0 have feedback but no control - anyone fix this?
control HDL Panel via iridium
Тригер и отключение сцены по второму нажатию
Добрый день, вопрос следующего характера. У меня по кнопке тригеру идет включение сцены. Можно ли следующим нажатием отключить сцену или включить другую? Используя только штатные средства программы? (Вариант с холдом есть, но хотелось бы при обычном нажатии выключать сценарий)Спасибо
KNX initial feedback request
Hi,
I was testing the App in KNX Environment (KNX UDP driver). Therefore, i was adding all necessary feedbacks from KNX, including lot of 2byte floating point values. After initialization of the app, i missed lots of them (and also others like 1bit). After investigation, it turned out that the app or the gateway does not send the requests on bus. After initial requests, i can update those values with a read request in knx, those will be updated in the app too.
Looks like that the app or gateway is running into some timeout/ or buffer overflow (if im just requesting a few feedbacks, everything works well)
MDT Gateway SCN.IP000.01 / Weinzierl BAOS 771
Ipad Air 2 / iridium v2.2
latest GUI Editor
Any suggestions?
Best,
Philipp
Сервис поддержки клиентов работает на платформе UserEcho
